Alesco Products

A80

ACE 12

NIX4

A500- A4000

ACCESSORIES

A80

The A80 is a 3,7 Kw portable induction heater. The A80 has been designed and built for everyday use in vehicle workshops, machine and plant engineering, in fitting and installation companies, metal construction, and maintenance.

There are a number of accessories available for the A80 such as a floor stand with additional water cooling and other heating tips.

Art number: 100880

Mains Supply	208 – 240 V 4-16 A/50-60 Hz
Enclosure	IP21
Power control	5 steps
Working frequency	17-40 kHz
Output power	3,7 kW
Weight	15 Kg with full water tank
Size	(LxWxH) 450x220x250 mm

A80 ACCESSORIES

STANDARD INDUCTOR

This is the standard inductor for the A80. It is durable and gives good access in confined spaces, and is a really good all-round tool.

The inductor is supplied complete with O-ring.

Art number: 100883

STRAIGHT INDUCTOR

This inductor allows you access where the standard inductor can’t fit. The heat comes from the front. It is as robust as all of our inductors. The inductor is supplied complete with O-ring.

Art number: 100884

HOSE PACKAGE

Size: 1,7 m , 2,1 kg

Art number: 800338

SCRATCH PROTECTOR

This scratch-protection prevents you from scratch sensitive surfaces such as car paint, badges etc.

Art number: 100885

PUMP-KIT

The pump-kit is for the external cooling.

Art number: 800500

COOLING ADAPTER

The adapter is used for the external cooling.

Art number: 800344

ACE 12

ACE12

ACE12 is a 12-kW portable induction heater, to be used in workshops, maintenance and production facilities.
The unit requires an external water supply and can be connected to almost any water source, or to the optional NIX4 cooling unit.

Minimum requirement for external water source is a max temp of 40°C, and a minimum flow rate of 4 litres/minute.

Art number: 501203

Mains supply	3x400V+pe/16A
Enclosure	ip21
Power control	10 steps
working frequency	15,5 kHz
Output power	12 kW
Weight	15 kg excl. hose package
Size	(LxWxH) 600x290x260 mm
Hose Pack lengths	3 or 6m
Water consumption	Max 6L/m during heating sequence

ACE ACCESSORIES

ACE STANDARD INDUCTOR

Art number: 500100

ACE STRAIGHT INDUCTOR

Art number: 100007

ACE HOSE PACKAGE

Size: 3 m, 3,68 kg – Art number: 508003

Size: 6 m, 5,57 kg – Art number: 508006

NIX4

NIX4 is a 4-Kw cooling unit designed for use with the ACE-platform. The built-in pump circuit allows you to place your ACE up to 50m from the cooler.

The refrigerating gas used in NIX, R134A has a low global warming potential and a minimum impact on Alescos environmental footprint

Art number: 507004

Mains Supply	3x400V+pe/16A
Enclosure	IP21
Cooling power	4 kW
Weight	150 kg (excl. handle)
Size	(LxWxH)800x600x600 mm

ACCESSORIES PREVIOUS MACHINES

STANDARD INDUCTOR

This is the standard inductor for the A1200.
It is durable and gives good access in confined spaces, and is a really good all-round tool.
The inductor is supplied complete with O-rings, washers and screws.

For models:
A700/A1000/A1100/A1200/A2000

Size: 200 mm

Art number: 100005

STANDARD INDUCTOR – LONG

This is longer than the orginal inductor and gives better access in confined spaces. The inductor is supplied complete with O-rings, washers and screws.

For models:
A700/A1000/A1100/A1200/A2000

Size: 285 mm
Art number: 100004

NOTE: This item is discontinued.
Please see article no 100005 as replacement.

STRAIGHT INDUCTOR

This straight inductor allows you access where the standard inductor can’t fit. The heat comes from the front. It is as robust as all of our inductors. The inductor is supplied complete with O-rings, washers and screws.

For models:
A700/A1000/A1100/A1200/A2000

Size: 285 mm

Art number: 100007

NOTE: This item has been upgraded to a new version from SN: 2010. You can find the item under ACE12 products!

STANDARD INDUCTOR FOR A3000/A4000

This is the standard inductor for the A3000 & the A4000. It is durable and gives good access in confined spaces, and is a really good all-round tool. The inductor is supplied complete with O-rings, washers and screws.

For models: A3000/A4000

Size: 210 mm

Art number: 100026

STANDARD INDUCTOR FOR A500/A800

This is the standard inductor for the A800. It is durable and gives good access in confined spaces, and is a really good all-round tool. The inductor is supplied complete with O-rings, washers and screws.

For models: A500/A800

Size: 200 mm

Art number: 100514

STRAIGHT INDUCTOR FOR A500/A800

This straight inductor allows you access where the standard inductor can’t fit. It’s just as durable as all our inductors. The inductor is supplied complete with O-rings, washers and screws.

For models: A500/A800

Size: 200 mm

Art number: 100565